EasyManuals Logo

Echo Pro Attachment Series PAS-265 User Manual

Echo Pro Attachment Series PAS-265
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #15 background imageLoading...
Page #15 background image
Pr o At t A c h m e n t Se r i e S
tm
15
oP e r A t o r 'S mA n u A l
s t a r t I n G w a r m e n G I n e
The starting procedure is the same as Cold Start except DO NOT close
the choke, and do not depress throttle trigger to wide open position.
WARNING
The attachment should not move at idle, otherwise serious personal
injury may result.
NOTE
If attachment moves, readjust carburetor according to “Carburetor
Adjustment” instructions in this manual or see your ECHO Dealer.
1. Stop Switch
Move stop switch button/lever (A) away from the STOP position.
2. Purge Bulb
Pump purge bulb (C) until fuel is visible and ows freely in the
clear fuel tank return line. Pump bulb an additional 4 or 5 times.
C
A
3. Recoil Starter
Lay the unit on a at area and keep movable attachment parts clear
of all obstacles. Rapidly pull recoil starter handle/rope (D) until
engine res.
NOTE
If engine does not start after 5 pulls, use Cold Start Procedure.
D
s t o p p I n G e n G I n e
1. Throttle
Release throttle and allow engine to return to idle before shutting off
engine.
2. Stop Switch
Move stop switch button (A) backward to STOP position.
WARNING
If engine does not stop when stop switch is moved to STOP posi-
tion, close choke - COLD START position - to stall engine. Have
your ECHO dealer repair stop switch before using unit again.
A

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Echo Pro Attachment Series PAS-265 and is the answer not in the manual?

Echo Pro Attachment Series PAS-265 Specifications

General IconGeneral
BrandEcho
ModelPro Attachment Series PAS-265
CategoryTrimmer
LanguageEnglish

Related product manuals