LUBRICATION 99944200553
20 X7702093407
© 1/2017 ECHO Inc.
7. Align hole in drive shaft housing
with gear housing shaft hole
(C), and seat lower drive shaft
end into gear housing shaft
mount. Install and tighten
locater screw (A).
8. Tighten gear housing mounting
bolt (B).
Brush Replacement
Level 1.
Brushes that are broken off, deformed, or worn to within 25.4 mm (1 in.) of
the brush holder drum should be replaced for best sweeping efficiency.
1. Locate brush holder access
hole (A) near outer drum end.
Parts Required: Standard Brush Assembly - P/N 99944200551 QTY (2).
Optional Brush Assembly - P/N 25020225661 QTY (2).
To Next Page
Loading...
