Echo RM-410ES

39
Specifications
Specifications
These specifications are subject to change without notice.
RM-410ES
External dimensions:
Length × Width × Height mm 2770 × 360 × 560
Mass:
Unit without cutting attachment, empty tank
Unit with specified cutting attachment, empty tank
Unit with specified cutting attachment, full tank
kg
kg
kg
11.5
12.0
12.9
Volume: Fuel tank L 1.2
Cutting attachment:
Specified blade diameter
Specified blade thickness
Number of cutting teeth
Blade centre hole diameter
Blade rotational speed at maximum allowable engine
speed
mm
mm
mm
r/min
255
3.0
3
25.4
10000
Gear ratio: Gear ratio and lubrication 1.33 reduction and good quality lithium grease
Rotational direction of output shaft seen from above: Anticlockwise
Engine:Type Air cooled 2-stroke single cylinder
Engine displacement
Maximum shaft brake power, measured in accordance
Engine speed at maximum engine power
Recommended maximum engine speed (With STD at-
tachment installed)
mL (cm
3
)
kW
r/min
r/min
42.7
1.68
8000
10500
Carburettor
Ignition
Spark plug
Starter
Clutch
Diaphragm type
Flywheel magneto - CDI system
NGK BPMR7A
Recoil starter
Automatic centrifugal clutch
Fuel:
Oil
Ratio
Regular grade petrol. Minimum 89 Octane unleaded
petrol is recommended. Do not use fuel containing
methyl alcohol or more than 10 % of ethyl alcohol.
Two stroke, air-cooled engine oil. ISO-L-EGD Stand-
ard (ISO/CD 13738), JASO FC,FD grade and ECHO
Premium 50 : 1 oil.
50 : 1 (2%)
Fuel consumption at maximum engine power
Specific fuel consumption at maximum engine power
kg/h
g/(kW•h)
0.89
529
Sound pressure level: (ISO 22868) L
pAeq
dB(A) 91.9
Guaranteed sound power level:(ISO 22868) L
WA
dB(A) 109
Vibration levels: (ISO 22867)a
hv,eq
m/s
2
m/s
2
Front handle 4.8
Rear handle 4.7