SRM-2120 OPERATION
X7507821400 19
© 10/24 ECHO Incorporated
Operation with Blades
Metal blades are very sharp and can cause severe injuries, even
if unit is off and blades are not moving. Avoid contact with
blades. Wear gloves to protect hands.
Blade use demands specific brushcutter configuration.
Operation without specified shield, barrier bar or U-handle, and
harness can result in serious personal injury. Follow installation
instructions.
Material to be cut Grass
Weed/
Grass
Weed/
Grass
Brush
<12.7 mm
(0.5 in.
)
Clearing
<63.5 mm
(2.5 in.)
Cutting Attachment
Nylon line
head
Maxi-Cut
head / Pro
Maxi-Cut
Head
3 tooth
blade /
8 tooth
blade
80 tooth
blade
22 tooth
blade
You must
install
these parts
Shield
Standard debris shield
included with SRM,
DSRM, T, PAS and DPAS
trimmer attachments, or
GT models (PRO Maxi-
Cut Head is not rated for
GT models)
Brushcutter shield supplied with U and
C model brushcutters, blade
conversion kit or PAS and DPAS
brushcutter attachments
Handle
Standard handle included
with SRM, DSRM, T, PAS
and DPAS or GT models
(PRO Maxi-Cut Head is
not rated for GT models)
U-Handle* or support handle with
barrier bar supplied with U and C model
brushcutters, blade conversion kit or
PAS and DPAS brushcutter
attachments
Harness
Not required**
Harness*** supplied with U and C
model brushcutters and blade
conversion kit
Upper/
lower plate
adapter
and
washer
Not
required
Washer
required,
included
with cutting
attachment
Upper/Lower blade plate adapter
included with U and C model
brushcutters, blade conversion kit or
PAS and DPAS brushcutter
attachments