PRODUCT REGISTRATION SRM-2120
48 X7507821400
© 10/24 ECHO Incorporated
PRODUCT REGISTRATION
Thank you for choosing ECHO Power Equipment
Please go to http://www.echo-usa.com/Warranty/Register-Your-ECHO to
register your new product on-line. It's FAST and EASY! NOTE: Your
information will never be sold or misused by ECHO Incorporated.
Registering your purchase enables us to contact you in the unlikely event of
a service update or product recall, and verifies your ownership for warranty
consideration.
If you do not have access to the Internet, you can complete the form below
and mail to:
ECHO Incorporated, Product Registration, PO Box 1139,
Lake Zurich, IL 60047.
Vibration Reduction
Systems
Without
Operating Rod 25.0 mm (1.0 in.) diameter aluminum tube
Drive Shaft 6.0 mm (0.24 in.) flexible shaft
Gear Case Ratio 1.62:1
Rotating Direction Counterclockwise (viewed from top)
Cutter Head
Rapid Loader
®
Head (2-line)
Handle
Front - D-loop type without anti-vibration
Rear - Plastic grip
Shoulder Harness Optional
Idle Speed 3,000 RPM
Clutch Engagement
Speed
4,200 RPM
Wide Open Throttle Speed 10,000 RPM
MODEL SRM-2120
To Next Page
Loading...
