6
Installation Guide
6
tel - 1-800-477-2267
email - support@aampglobal.com
Illustrations are typical and may not match exact vehicle detail
Step 3
Remove the two T20 Torx bolts, one behind each vent, that
were exposed by removing the vents.
Dash Disassembly (continued)
FCTP-MB1903
Sprinter Tow Package
Step 5
Remove the radio display by disconnecting the 3 connectors
and set it in a safe area to avoid damage.
Once the radio display is removed, place in safe area
to avoid damage.
NOTE
Step 4
Using both hands, pull at the upper corner of the dash
panel that houses the LCD screen from the dash.
To Next Page
Loading...
