Operation
Section 5
Digital Satellite Receiver Page 5 - 13
© 2001 EchoStar International Corporation
All rights reserved
5
3.3. USE THE INFOBANNER RELATED FUNCTIONS
3.4. TO SELECT THE ALTERNATE AUDIO
3.5. TO SELECT THE SUBTITLE LANGUAGE
1. On the RCU, press the i-key.
2. If available, allow the receiver to collect the EPG
information for the selected channel.
3. If the i-button in the InfoBanner is shown,
use the i-key on the RCU to shift between the
detailed program information and the InfoBanner.
4. On the RCU, press the EXIT key to remove the
InfoBanner from the screen (only in TV-mode).
1. On the InfoBanner, find the alt audio symbol.
2. On the RCU, press the key.
3. In the Alt. Audio pop-up menu, select the
required alternate audio.
Note that alternate audio information is provided
by the service provider.
4. On the RCU, press the key twice.
1. On the InfoBanner, find the subtitle symbol.
2. On the RCU, press the key twice.
3. In the subtitle pop-up menu, select the required
subtitle language.
Note that subtitle information is provided by the
service provider.
4. On the RCU, press the key.
To Next Page
Loading...
