EchoStar AD-3600 IP Viaccess - Page 58

Section 6 Maintenance
Page 6 - 4 EchoStar AD-3600IP Viaccess
© 2001 EchoStar International Corporation
All rights reserved
2.6. TO GET CONDITIONAL ACCESS INFORMATION
2.7. TO ADD A SATELLITE
1. On the RCU, press:
a. the MENU key;
b. the  key to select the menu;
c. the OK key, to select the menu.
2. Press the OK key and make the selections.
3. Read the available help text for information.
1. On the RCU, press:
a. the OK key;
b. Select Mode = TV
c. Select List = All Channels
d. Select Group = None
e. Select Sort = None
f. Select Edit = Add SAT
2. On the RCU, press the OK key.
3. Use the on-screen keyboard to enter the name of
the satellite.
4. When the keyboard appears:
a. use the arrow keys to navigate;
b. press OK to accept the character;
c. select the button to get lower case
characters and numbers;
d. select the button
e. on the RCU, press the OK key to confirm.
5. On the RCU, use the numeric keys to enter the
Position.
6. Select the Location.
7. On the RCU, press the white key.