21
Press the Red button to lock / unlock the selected c
hannel.
Locked channels will be skipped when scrolling
through the channels.
Note) The color of the highlighted bar turns to red when it is on a locked channel.
Installation Lock &
edit Lock
TV Channel Lock
VCR Timer
You can edit “VCR Timer” only after you put in all
the data in the “Local Time Setting”
Total of 5 events are programmable for your
VCR recording with the EchoStar D-2510IP
VIACCESS.
If recording “On” is not available, you may check the followings ;
1) Overlapped Events : Check your prior setting for recording. The time for recording(from Start to Stop)
might be overlapped with the new setting.
2) Local Time Setting : Any event which starts earlier than your “Local time Setting” might not work.
Please turn on your VCR to record an event.
VCR Timer
Date(mm/dd/yyyy) ??/??/????
Satellite ASIASAT2
Channel Saudi Ch1
Start Time ( hh:mm) ??:??
Event Number 1
2
4
3
5
Current Date & Time - Nov./20/1999(Sat.) 20:00
6
8
7
Stop Time (hh:mm) ??:??
Type(O/D/W/M) Once
Recording(On/Off ) OFF
Exit
i
× 1 Ø
If the Receiver Lock is [ON], you have to put in the correct code to operate
the receiver.
Receiver Lock
Select an event number from 1 to 5, choose your
wanted Satellite and Channel (only searched
satellites and channels are available to be selected),
input Start time and Stop time (not 12-hours &
AM/PM, but 24 hour system), select your recording
time among O(once) / D(daily) / W(weekly) /
M(monthly).
“On” for recording (On/Off) is only available when
all the data is properly put in or selected.
Press the VIEW key to see a thumbnail of the current
channel in this menu.
TV Channel Lock
Voyage
Contact TV
LC I
Canal J
Paris Premere
33
34
36
35
37
38
40
39
DF 1 Info-Kanal
Star Kino
CNN
Lock Unlock Exit
i
TV Channels
If the Installation & Edit Lock is [ON], you have to put in the correct code to en
ter directly into the “Installation” and “Edit” menu.
To Next Page
Loading...
