Ecler CA120 - Page 38

38
REMOTE_SELECTO
R
<Rem Select
Value>
<Zone>
Shows de current REMOTE SELECTOR function for the specified ZONE
IR_REMOTE
ON/OFF
Shows the current IR REMOTE status (ON or OFF)
DISPLAY_MODE
<Display Mode>
Shows the current DISPLAY MODE
LCD_CONTRAST
<Contrast Level>
Shows the current DISPLAY CONTRAST level
AUTO_STANDBY
ON/OFF
Shows the current AUTO STANDBY function status (ON or OFF)
AUTOLOAD_PRES
ET1
ON/OFF
Shows the current AUTOLOAD_PRESET1 at Startup function
PANEL_LOCKED
ON/OFF
Shows the current PANEL_LOCKED (front panel controls) status
INFO_MODEL
<Device Model>
Shows the Device model name
INFO_VERSION
<Firmware
Version>
Shows the current Firmware Version
DAM514
TYPE
PARAM1
PARAM2
PARAM3
PARAM
4
DESCRIPCIÓN
GET
ALL
Dumps current device status (with DATA messages)
INFO_MODEL
Gets the Device model name
INFO_VERSION
Gets the current Firmware Version
AUTOLOAD_PRESET1
Gets the current AUTOLOAD_PRESET1 at Startup function
PRESET_NUMBER
Gets the current PRESET number
PRESET_NAME
<Preset=P1:P20>
<Preset=T1:T6>
Gets a certain PRESET (from P1 to P20) or TEMPLATE (from T1 to T6)
name
REMOTE_MODE
<Remote=R1:R4>
Gets the working mode for a certain REMOTE port (from R1 to R4)
REMOTE_INPUTS
<Remote=R1:R4>
Gets the list of inputs affected by the working mode of a certain
REMOTE port (from R1 to R4)
REMOTE_ZONES
<Remote=R1:R4>
Gets the list of outputs affected by the working mode of a certain
REMOTE port (from R1 to R4)