Ecler CA120 - Page 39

39
DISPLAY_MODE
Gets the current LCD DISPLAY MODE
LCD_CONTRAST
Gets the current LCD DISPLAY CONTRAST level
EXT_MUTE_ZONES
Gets the outputs to be muted by an external contact closure,
connected to the MUTE port
IN_LABEL
<Input=I1:I5>
Gets the current LABEL (name) for the specified INPUT
IN_STEREO
<Input=I4:I5>
Gets the current STEREO link status (ON or OFF) for INPUTs 4 and 5
IN_MUTE
<Input=I1:I5>
Gets the current MUTE status (ON or OFF) for the specified INPUT
IN_VOL
<Input=I1:I5>
Gets the current VOLUME for the specified INPUT (general input
volume, affecting all the post processing)
IN_BASS
<Input=I1:I5>
Gets the current BASS tone LEVEL for the specified INPUT
IN_MID
<Input=I1:I5>
Gets the current MIDDLE tone LEVEL for the specified INPUT
IN_TREBLE
<Input=I1:I5>
Gets the current TREBLE tone LEVEL for the specified INPUT
HPF_ACTIVE
<Input=I4:I5>
Gets the current HIGH PASS FILTER status (ON or OFF) for the
specified INPUT
HPF_FREQUENCY
<Input=I4:I5>
Gets the current HIGH PASS FILTER frequency (Hz) for the specified
INPUT
FBS_ACTIVE
<Input=I4:I5>
Gets the current FEEDBACK SUPPRESSOR feature status (ON or OFF)
for the specified INPUT
GATE_ACTIVE
<Input=I4:I5>
Gets the current NOISE GATE status (ON or OFF) for the specified
INPUT
GATE_THRESHOLD
<Input=I4:I5>
Gets the current NOISE GATE THRESHOLD LEVEL (dBx10) for the
specified INPUT
GATE_DEPTH
<Input=I4:I5>
Gets the current NOISE GATE DEPTH (attenuation when gate is
closed, dBx10) for the specified INPUT
GATE_ATTACK
<Input=I4:I5>
Gets the current NOISE GATE ATTACK TIME (milliseconds x10) for the
specified INPUT
GATE_HOLD
<Input=I4:I5>
Gets the current NOISE GATE HOLD TIME (milliseconds x10) for the
specified INPUT
GATE_RELEASE
<Input=I4:I5>
Gets the current NOISE GATE RELEASE TIME (milliseconds x10) for
the specified INPUT