Ecler CA120 - Page 41

41
ZONE_MUTE
<Zone=ZA:ZD>
Gets the current MUTE status (ON or OFF) for the specified output
zone
ZONE_VOL
<Zone=ZA:ZD>
Gets the current VOLUME for the specified output zone
GEQ_ACTIVE
<Zone=ZA:ZD>
Gets the current GRAPHICAL EQUALIZER status (ON or OFF) for the
specified output zone
GEQ_GAIN
<Zone=ZA:ZD>
<Band=B1:B10>
Gets the current GAIN (dBx10) of one BAND (B1 to B10) of the
GRAPHICAL EQUALIZER for the specified output zone
XOVER_ACTIVE
<Zone=ZA:ZD>
Gets the current CROSSOVER FILTER status (ON or OFF) for the
specified output zone
XOVER_TYPE
<Zone=ZA:ZD>
Gets the current CROSSOVER FILTER TYPE (LP or HP) for the
specified output zone
XOVER_FREQUENCY
<Zone=ZA:ZD>
Gets the current CROSSOVER FILTER FREQUENCY (Hz) for the
specified output zone