Ecler CA120 - Page 50

50
DAM614
TYPE
PARAM1
PARAM2
PARAM3
PARAM
4
DESCRIPCIÓN
GET
ALL
Dumps current device status (with DATA messages)
INFO_MODEL
Gets the Device model name
INFO_VERSION
Gets the current Firmware Version
AUTOLOAD_PRESET1
Gets the current AUTOLOAD_PRESET1 at Startup function
PRESET_NUMBER
Gets the current PRESET number
PRESET_NAME
<Preset=P1:P20>
<Preset=T1:T9>
Gets a certain PRESET (from P1 to P20) or TEMPLATE (from T1 to T9) name
REMOTE_MODE
<Remote=R1:R4>
Gets the working mode for a certain REMOTE port (from R1 to R4)
REMOTE_INPUTS
<Remote=R1:R4>
Gets the list of inputs affected by the working mode of a certain REMOTE port
(from R1 to R4)
REMOTE_ZONES
<Remote=R1:R4>
Gets the list of outputs affected by the working mode of a certain REMOTE port
(from R1 to R4)
DISPLAY_MODE
Gets the current LCD DISPLAY MODE
LCD_CONTRAST
Gets the current LCD DISPLAY CONTRAST level
EXT_MUTE_ZONES
Gets the outputs to be muted by an external contact closure, connected to the
MUTE port
IN_LABEL
<Input=I1:I6>
Gets the current LABEL (name) for the specified INPUT
IN_STEREO
<Input=I3:I6>
Gets the current STEREO link status (ON or OFF) for INPUTs 3 and 4
IN_MUTE
<Input=I1:I6>
Gets the current MUTE status (ON or OFF) for the specified INPUT
IN_VOL
<Input=I1:I6>
Gets the current VOLUME for the specified INPUT (general input volume,
affecting all the post processing)
IN_BASS
<Input=I1:I6>
Gets the current BASS tone LEVEL for the specified INPUT
IN_MID
<Input=I1:I6>
Gets the current MIDDLE tone LEVEL for the specified INPUT
IN_TREBLE
<Input=I1:I6>
Gets the current TREBLE tone LEVEL for the specified INPUT
HPF_ACTIVE
<Input=I3:I6>
Gets the current HIGH PASS FILTER status (ON or OFF) for the specified INPUT
HPF_FREQUENCY
<Input=I3:I6>
Gets the current HIGH PASS FILTER frequency (Hz) for the specified INPUT