Ecler CA120 - Page 51

51
FBS_ACTIVE
<Input=I3:I6>
Gets the current FEEDBACK SUPPRESSOR feature status (ON or OFF) for the
specified INPUT
GATE_ACTIVE
<Input=I3:I6>
Gets the current NOISE GATE status (ON or OFF) for the specified INPUT
GATE_THRESHOLD
<Input=I3:I6>
Gets the current NOISE GATE THRESHOLD LEVEL (dBx10) for the specified
INPUT
GATE_DEPTH
<Input=I3:I6>
Gets the current NOISE GATE DEPTH (attenuation when gate is closed, dBx10)
for the specified INPUT
GATE_ATTACK
<Input=I3:I6>
Gets the current NOISE GATE ATTACK TIME (milliseconds x10) for the specified
INPUT
GATE_HOLD
<Input=I3:I6>
Gets the current NOISE GATE HOLD TIME (milliseconds x10) for the specified
INPUT
GATE_RELEASE
<Input=I3:I6>
Gets the current NOISE GATE RELEASE TIME (milliseconds x10) for the specified
INPUT
TALKOVER_ACTIVE
<Input=I3:I6>
Gets the current TALKOVER status (ON or OFF) for the specified INPUT
TALKOVER_MODE
<Input=I3:I6>
Gets the TALKOVER function working mode (PAGER or DUCKER) for the
specified INPUT
TALKOVER_PRIORITY
<Input=I3:I6>
Gets the current TALKOVER PRIORITY level (LOW or HIGH) for the specified
INPUT
TALKOVER_ZONES
<Input=I3:I6>
Gets the current TALKOVER assignment to outputs (ZONES) for the specified
INPUT
TALKOVER_THRESHOLD
<Input=I3:I6>
Gets the current TALKOVER THRESHOLD LEVEL (dBx10) for the specified
INPUT
TALKOVER_DEPTH
<Input=I3:I6>
Gets the current TALKOVER DEPTH (attenuation, dBx10) for the specified
INPUT
TALKOVER_ATTACK
<Input=I3:I6>
Gets the current TALKOVER ATTACK TIME (milliseconds x10) for the specified
INPUT
TALKOVER_HOLD
<Input=I3:I6>
Gets the current TALKOVER HOLD TIME (milliseconds x10) for the specified
INPUT
TALKOVER_RELEASE
<Input=I3:I6>
Gets the current TALKOVER RELEASE TIME (milliseconds x10) for the specified
INPUT