Ecler WPNET Series - Unit WPNET12 KV Management

16
6.3 Unit WPNET12KV management
It is possible to use an adjacent pair of panels, consisting of a WPNET4KV unit and an
WPNET8K unit, becoming a new single panel of greater dimensions and number of
available controls for programming purposes and remote control possibilities, model
WPNET12KV.
Refer to the chapter 5.2. Installation of a pair of adjacent WPNET4KV and WPNET8K
panels, on surface or flush: for more information on assembling such a pair.
Front panel controls / on-screen information
The resulting panel, model WPNET12KV, has the rough appearance of the previous
image.
WPNET12KV has the following possible remote control functions on a MIMO4040DN
unit, programmed from the EclerNet Manager application:
 Selecting sources or presets from a preset list in the EclerNet project
 Adjusting the volume of a preset signal in the EclerNet project
 MUTE ON/OFF of the same previous signal, preset in the EclerNet project
In the previous image on the front panel, the available physical controls are:
 K1 to K12: keys directly associated with adjacent functions displayed on the
screen
 K13: digital rotary control, or encoder, with rotary and pulsation functions