Ecler WPNET Series - Units WPNET4 KV or WPNET12 KV Operation in MULTI MODE

25
If the volume control function is not enabled for the WPNETEX unit, turning or pressing
the rotary control will temporarily display such a screen, with the central flashing “- -“
symbols:
The long press (> 5 seconds) on the rotary control displays the configuration parameters
of the unit: name, model, firmware version and Ethernet network connection
parameters:
6.5 Units WPNET4KV or WPNET12KV operation in MULTI MODE
From EclerNet Manager it is possible to include in a project panels such as WPNET4KV
and/or WPNET12KV the "MULTI” type. This type of panels are associated to a
hardware unit WPNET4KV or WPNET12KV, respectively, which are programmed to
take the role of different individual panels WPNET4KV or WPNET12KV included in the
project. These individual panels can, in turn, have a one-to-one link with real
WPNET4KV or WPNET12KV hardware units, or exist in the project only virtually.
In this way, by taking on the role of different individual panels, each with its specific
programming, it is possible from a single hardware panel to act on different zones of a
MIMO4040DN unit (panels with source selectors) and/or even opt to select different
sets of presets (panels with preset selectors).