Need help?Do you have a question about the Eclipse RatioMatic RM2000 and is the answer not in the manual?
Details the RatioMatic burner's design, capabilities, and applications up to 1900°F.
States the manual's goal to ensure safe, effective, and trouble-free combustion system installation.
Provides critical safety notices for burner operation, including fire and explosion hazards.
Emphasizes the importance of trained operators and ongoing training for safe equipment operation.
Guidelines for handling, storing components, and approving safety equipment.
Lists applicable codes and standards for electrical wiring and gas piping.
Checklist for air supply, exhaust, environment, and component preparation before installation.
Details on chamber opening, mounting patterns, chamber wall, and burner mounting.
Instructions for installing refractory blocks, including curing schedules and block holder temperatures.
Guidance on supply piping, pilot valve trains, and piping support methods.
Procedure for resetting the system and setting the low fire air differential pressure.
Detailed procedures for igniting the burner based on system configuration (RM0050-RM0700).
Steps to set low fire gas and verify air settings for proper burner operation.
Procedures for adjusting pilot, high fire gas, and low fire flame for specific models.
Provides monthly and yearly checklists for routine burner maintenance and inspection.
Identifies common burner problems, their possible causes, and suggested solutions.
Tables for converting between metric and English units for various measurements.
To Next Page
General
