To Next Page
J
Jeffrey WalterAug 11, 2025
What to do if Eclipse TA cannot initiate a start sequence?
- HHeather BaldwinAug 11, 2025
If your Eclipse burner won't start, consider these potential causes: * The air pressure switch hasn't made contact: Check its adjustment, the air filter, blower rotation, and outlet pressure from the blower. * A high or low gas pressure switch has activated: Check incoming gas pressure and adjust if necessary. Also, check the pressure switch setting and operation. * There's a malfunction of the flame safeguard system or no power to the control unit: Have a qualified electrician troubleshoot and correct the problem. * The main power is off: Ensure the main power to the system is switched to the 'on' position.
General
