Eclipse ThermAir T/A Series v1.10, Installation Guide No. 114, 4/7/06
11
Installation
3
iNtroDuCtioN
haNDliNg aND storage
approvals of
CompoNeNts
Limit Controls and Safety
Equipment
In this section you will find important notices about safe
operation of the burner:
Handling:
1. Make sure that the components are clean and free of dam-
age.
2. Protect the components from weather, damage, dirt and
moisture.
• Transport in original shipping container
• Do not drop
3. Protect the components from excessive temperatures and
humidity.
4. Use appropriate support equipment, i.e. harnesses, straps,
chains etc. when lifting burner components.
Storage:
1. Make sure that the area is clean.
2. Store the components in a cool, clean, dry room.
3. After you have made sure everything is present and in good
condition, keep the components in the original package as
long as possible.
All limit controls and safety equipment must comply with the
current following standards:
• NFPA Standard 86
• NFPA Standard 86C
• UL
• FM
• CGA
• EN 746-2
• all applicable local codes and/or standards.
To Next Page
Loading...
Need help?
General
