Safety Warnings
In installation and use of this product, comply with the National Electrical Code and any
other applicable Federal, State, or local safety codes.
Always wear eye protection when working near engines, vehicles, or machinery.
During installation, turn off the power and take all other necessary precautions to prevent
injury, property loss, and equipment damage. Do not apply power until all wiring is
completed.
Never work on a running engine.
When installing the AFRecorder's power and AFR sensors on a stopped engine it is best to
think-out your moves before you make them.
Route and cable-tie all sensors and cables away from hot, moving, sharp, high energy
(spark), and caustic objects.
Take into consideration the movement of the engine, chassis, and wind buffeting when
instrumenting the engine.
Clear tools away from the engine before starting.
Operate the engine only in a well ventilated area and never when you or one of your
coworkers is tired.
When operating the AFRecorder in a moving vehicle, the operator should keep his or her
eyes on the road.
One measure of professionalism is how much you and your coworkers can accomplish
without an injury. Always be at your professional best. Think and act with safety in mind.
Safety Warnings 45
To Next Page
Loading...