Notes:
1
The AFR cabling can be modified to suit customer needs.
2
When the Severe Duty Panel-Mount Cable Kit (Part No. 4800R-21) is supplied, the AFR
sensors are equipped with matching severe duty connectors. An AFR sensor with a severe
duty connector is Part No. 2400E-1S. AFRecorder to back-of-panel AFR cabling is not
supplied as part of kit unless requested.
3
The Severe Duty Panel-Mount Cable Kit consists of:
1. Quantity 2 of AMP CPC Connector/Plug/Clamp Terminal Kit (Part No.
4800R-19). Each kit includes the following:
a. Connector Plug AMP 206708-1
b. Cable Clamp AMP 206966-1
c. Terminals for 24-20 AWG Wire (Quantity 6) AMP 66105-4
d. Terminals for 18-14 AWG Wire (Quantity 2) AMP 66360-4
2. Quantity 1 of Fischer Panel-Mount Connector/ID Ring/Sealing Cap Kit, Left
Channel/Black (Part No. 4800R-20L). Each kit includes the following:
a. Panel-mount Connector Fischer D105A062
b. Black connector ID Ring Fischer 105.2282
c. Connector Sealing Cap Fischer 105.2132
3. Quantity 1 of Fischer Panel-Mount Connector/ID Ring/Sealing Cap Kit, Right
Channel/White (Part No. 4800R-20R). Each kit includes the following:
a. Panel-mount Connector Fischer D105A062
b. White connector ID Ring Fischer 105.2281
c. Connector Sealing Cap Fischer 105.2132
4. 15’ Severe Duty AFR Cable Extension, Left/Black Channel (Part No. 2400E-
30L).
5. 15’ Severe Duty AFR Cable Extension, Right/White Channel (Part No. 2400E-
30R).
Introduction 3
To Next Page
Loading...