Ecoair DD1 Simple - Bs Plug Wiring

@2022 EcoAir - V1.5 Page 2 All rights reserved (E&OE)
BS PLUG WIRING
Should it be necessary to change the plug, please note the wires in the mains lead are colour
coded as follows:
BLUE - NEUTRAL
BROWN – LIVE
GREEN AND YELLOW - EARTH
In the event that the colours of the wires in the mains lead of this appliance do not corre-
spond with the coloured markings idenfying the terminals in your plug, proceed as follows:
1. The BLUE wire is NEUTRAL and must be connected to the terminal which is marked
with the leer N or coloured BLACK.
2. The BROWN wire is LIVE and must be connected to the terminal which is marked with
the leer L or coloured RED.
3. The GREEN/YELLOW is EARTH and must be connected to the terminal which is marked
with the leer E or or coloured GREEN or GREEN/YELLOW.
4. Always ensure that the cord grip is posioned and fastened correctly.
5. If a 5A (BS 1363) fused plug is used it must be ed with a 5A -fuse.
If in doubt consult a qualied electrician.
Please note the Earth, Neutral and Live Terminals are marked as E , N and L respecvely.