USING THE
TOUCH SCREEN
The Smart Thermostat uses touch screen technology
that makes navigation easy. Lightly tap the icons,
buttons and lists or drag your nger across the screen
to move a slider or scroll through a list.
Note: To prevent damage to the touch screen, never use
a sharp object such as a pen.
When the screen shows a list of items, an arrow to the
right of the item indicates more than two options to
choose from. Touching this arrow will bring you to a
new list or screen.
If there are only two options for a given list, they will
be displayed next to a switch within the list. Pressing
anywhere on the item will toggle from one option to
the other.
In the various screens on the thermostat, you have three
ways to navigate:
Press Cancel to go back to the previous screen without
saving changes.
Press Done to save changes and move to the next screen.
At any time, press the home button (found at the right-
hand side of the touch screen). This cancels any action
and takes you back to the home screen.
What’s on the Home screen?
The Home Screen displays the current temperature in
your home, various heating and cooling settings, and
icons for navigating to other features and settings of
the Smart Thermostat.
The Home Screen is the default display on your
Smart Thermostat.
1
. Set Temperature
The set temperature is the temperature the system is
programmed to maintain. You can adjust it manually,
but for maximum savings you should automate the
temperature setting by programming the thermostat.
See Programming Your Smart Thermostat on page 18.
2. Set Temperature Adjustment Slider
Using your nger, drag the slider back and forth to
manually lower or raise the temperature. Tapping at
either end of the temperature scale will move the
slider by 1°F (0.5°C). When you manually adjust the set
temperature you will put the system into a Hold mode.
See Holding Action on page 11.
3. Current Temperature
This is the current temperature in the room where the
Smart Thermostat is installed. The thermostat sends
signals to your heating and cooling system to make sure
this temperature matches the set temperature on the
thermostat. You can set the Smart Thermostat in Celsius or
Fahrenheit. See Setting up your Thermostat on page 10.
4. System and Fan Settings
Displays the current operating mode of your heating
and cooling system, as well as the furnace fan setting.
Press Details to adjust these settings.
5. System Messages
Provides additional information on the operation of
the system.
6. WiFi Signal Strength Indicator
Indicates the strength of the signal the Smart Thermostat
is receiving from your WiFi router. You must have WiFi
enabled for the indicator to work.
7. Current Date and Time
Displays the current date and time for your time zone.
8. Internet Connection Indicator
Indicates that the Thermostat is connected to the Internet
1
2
3
4
6
7
8
3 Using the Touch Screen Using the Touch Screen 4
Home screen features
5
To Next Page
Loading...
