Re-registering the Thermostat
There are times when you may need to re-register
your Smart Thermostat. For example, if you are a new
homeowner who has just moved to a home with an
existing ecobee Smart Thermostat.
Press More, then Settings. Select Reset and choose
Reset Registration from the list. You can then follow the
registration process described on the previous page.
SETTING UP YOUR
SMART THERMOSTAT
This section of the manual describes how to set up and
congure your Smart Thermostat using the touch screen.
There are three key steps:
Personalizing your Smart Thermostat
Setting up Reminders
Programming the thermostat using the Wizard or Editor.
Personalizing your Smart Thermostat
Preferences allow you to personalize your ecobee Smart
Thermostat and include settings for how temperature,
time and date are displayed.
Temperature Display
Touch the Temperature Display to select Fahrenheit (°F)
or Celsius (°C).
Date and Time
Touch Date & Time to:
Set the current date
Set the current time
Select between 12-hour or 24-hour time format
Select your time zone
Enable or disable daylight savings adjustments.
Program the time and date, as well as your time zone.
If you are connected to the Internet, time and date are
programmed automatically.
The time zone determines when the system needs to
adjust for daylight savings time.
To adjust the date and/or time, use your nger to spin
the scroll wheels up or down.
Sound Eects
The Smart Thermostat can make sounds when you press a
button or when an alert is generated. Press Sound Eects to:
Turn on/o the sound when a button is pressed
Adjust the volume of the sound when a button is pressed
Turn on /o the sound when an alert is generated
Adjust the volume of the sound for an alert.
To set up Preferences:
From the Home
screen, Press More.
Press Settings and
select Preferences
and adjust to your
needs.
9 Connecting your Smart Thermostat via the Internet Setting up your Smart Thermostat 10
To Next Page
Loading...
