ECT Install and User Guide
Feb 2023
26 of 61
ECOER INC.
Manufacturer reserves the right to change specifications or designs without notice.
Indoor Unit
GEAR function
1.When the indoor unit sending wire controller has the GEAR
function, in the boot cooling mode, press the function key to select
the GEAR icon, press the confirm key to enter the GEAR control mode,
and first display the current GEAR status.
50%->75%->OFF can be switched by the up and down keys within 5
seconds. After 5 seconds, the set temperature will be displayed, press
the up and down keys to adjust the set temperature.
Turn off, switch to mode or turn on sleep, ECO, strong, self-cleaning
functions to cancel the GEAR function.
When the follow me function indicator
appears, the room temperature is detected by
the wire controller.
Press the button again to cancel the
follow me function.
To Next Page
Loading...
