Ecoflam BLU 120 P User Manual

AZUR 40
AZUR 60
BLU 120 P
BLU 120 P
Multicompact
BM2
LB357
02.11.2004
BRUCIATORI DI GAS AD ARIA SOFFIATA
BRULEURS GAZ A AIR SOUFFLE
BLOWN AIR GAS BURNERS
GASBRENNER MIT BLASLUFT
MMOODDEELLLLII
MMOODDEELLEESS
MMOODDEELLSS
MMOODDEELLLLEE

Ecoflam BLU 120 P Specifications

General

Category	Burner
Model	BLU 120 P
Brand	Ecoflam
Burner Type	Monoblock
Power Supply	230V
Voltage	230 V
Frequency	50 Hz
Protection Rating	IP40
Fuel Type	Oil
Thermal Output (max)	120.0 kW

Summary

Burner Technical Data

AZUR 40 Specifications

Technical specifications for the AZUR 40 model.

AZUR 60 Specifications

Technical specifications for the AZUR 60 model.

BLU 120 P / MULTICOMPACT Specifications

Technical specifications for BLU 120 P and Multicompact models.

Pressure Regulator Adjustment

Burner Starting-Up Procedures

Preliminary Checks

Combustion Adjustment (Methane)

Fault Diagnosis

Understanding burner block codes and their meanings.

Fault Display Messages

VPS 504 Seal Control Device Operation

Air Pressure Switch Adjustment

Gas Pressure Switch Adjustment

Annual Inspection

Before Each Intervention Check

Pre-intervention checks for safety and readiness.

Burner Will Not Start

Troubleshooting steps for startup failure.

Burner Prevents and Locks at End of Cycle

Diagnosing lockout after pre-ventilation.

Burner Prevents and Will Not Ignite

Burner Starts and Locks After Safety Time

Burner Starts and Locks After Few Minutes