Ecoflam Blu 1200 PR/MD User Manual

LB381
13.07.2004
A BRUCIATORI A GAS PROGRESSIVI E MODULANTI
B
MODULATING AND PROGRESSIVE GAS BURNERS
C BRULEURS GAZ PROGRESSIVES ET MODULANTS
D QUEMADOR DE GAS PROGRESIVOS EN MODULANTE
Blu 500 PR / MD
Blu 700 PR / MD
Blu 1000 PR / MD
Blu 1200 PR / MD
Blu 1400 PR / MD
Metano (G20) / G.P.L.(G30-G31)

Ecoflam Blu 1200 PR/MD Specifications

General

Brand	Ecoflam
Model	Blu 1200 PR/MD
Category	Burner
Language	English

Summary

Installation and Start-Up Procedures

Electrical and Gas Connections

Guidelines for electrical hookup and safety precautions.

Burner Start-Up Sequence

Step-by-step guide for safely starting the burner.

Combustion Adjustment and Important Advice

Important advice and procedures for adjusting combustion.

Performance and Combustion Settings

Combustion Adjustment and Firing Head

Adjusting combustion and the firing head position for optimal performance.

Gas Conversion and Pressure Switch Setup

Pressure Switch Adjustment Procedures

RWF 40 Microprocessor Regulator

Regulator Description and Interface

Regulator Programming Levels

Navigation through the regulator's different programming levels.

Parameter Settings and Configuration

Changing Set Points and PID Parameters

Instructions for modifying set points and automatic PID tuning.

Differential Settings and Operational Modes

Input Configuration and Error Handling

Input Configuration Indications

Error/Fault Indication Display

Understanding blinking number indications on the display for faults.

Maintenance and Troubleshooting

Annual Check and Component Replacement

Burner Operation Troubleshooting

Diagnosing and resolving common burner start-up and operation failures.