Need help?Do you have a question about the Ecoflam BLU 1500.1 PR and is the answer not in the manual?
General| Model | BLU 1500.1 PR |
|---|---|
| Brand | Ecoflam |
| Control | Electronic |
| Ignition | Electronic |
| Flame Supervision | Ionization probe |
| Category | Burner |
| Fuel Type | Gas |
| Power Supply | 50Hz |
Details maximum/minimum thermal power, gas pressures for natural gas and LPG, voltage, and motor specifications.
Presents the operational working field graph and overall physical dimensions of the burner.
Guidance on connecting the burner's electrical supply, including motor and auxiliary equipment.
Instructions for connecting the burner to the gas pipeline and performing initial pressure checks.
Step-by-step guide for initiating the burner's operation sequence, including preventilation.
Covers adjusting combustion parameters and important operational advice for optimal performance.
Details the function and timing sequence of the Landis & Staefa LGB22 control box.
Explains the adjustment of the Landis & Staefa SQN 31 251A2700 air damper motor cams.
Provides a method to calculate the burner's working output in kW.
Instructions for adjusting the air flow to the burner for optimal combustion.
Guidance on adjusting the maximum gas and air flow rates for the burner.
Instructions for adjusting the minimum gas and air flow rates for the burner.
Procedure for adjusting gas and air flow rates at intermediate burner capacities.
Describes how to adjust the firing head position for optimal combustion efficiency.
Instructions for changing the burner operation from natural gas to LPG.
Details on adjusting the gas minimum pressure switch and the air pressure switch.
Procedure for measuring ionization current for burner diagnostics and setup.
Overview of the burner's control panel components and their functions.
Steps for performing regular annual maintenance on the burner.
Guidance on diagnosing and resolving common burner operational problems.
To Next Page