EcoFlow POWEROCEAN SINGLE-PHASE - Installation Environment Requirements; Installation Space Requirements

4|
680 mm
280 mm
732 mm
1129 mm
1525 mm
≥300 mm
183 mm
System
Installation

• The installation and use environment must meet relevant international, national,
and local standards for lithium batteries, and are in accordance with the local
laws and regulations.

• When installing the equipment in a garage, keep it away from the drive way.
• The mounting structure where the equipment is installed must be fire resistant.
Do not install the equipment on flammable building materials.
• Ensure that the installation surface is solid enough to bear the weight of the
equipment.
Installation Environment
Requirements


• Ensure there is enough space on both sides of the battery to facilitate the locking
operation of the screws on the side of the battery.
• Reserve enough clearance around equipments to ensure sufficient space for
installation and heat dissipation.
Installation Space
Requirements
30-60 mm
15.3kWh10.2kWh
5.1kWh
55.5kg
21.5kg
65-85 mm
≥300 mm
≥300 mm
AVOID DIRECT SUNLIGHT, RAIN, OR SNOW
90°
VERTICAL
POSITION
WELL-
VENTILATED
AREA ONLY
AVOID UNEVEN GROUND
AWAY FROM CHILD & WORKING &
LIVING AREAS
NOT INTENDED FOR MOBILE SCENARIOS NOT INTENDED FOR IMPORTANT DEVICES
AWAY FROM
Infrared radiationExplosive material Flammable material
Heat source
Moisture
Solvent Gasoline
-20
℃
-50
℃
0%-100% RH
IP65AVOID PIPES
& CABLES &
REINFORCING
BAR
≤3000 m
ALTITUDE
>500 m
DISTANCE
FROM THE SEA
Salt
Corrosion