18|
• Use shielded CAT 5 or higher rating network cable for stable connection.
Connecting to
Internet
Refer to the System Commissioning section in this guide to connect to a wireless network.
3
Test network cable connection. If the LEDs of the two RJ45 ports light up in sequence, it indicates that the network cable is
correctly wired and should be fully operational.
Ethernet Cable Tester
Ideal connection
Incorrect wiring standard Poor connection
LAN
2
Both ends of the network cable use the T568B wiring standard.
1
1
2
3
4
5
6
7
8
A4
10-20 mm 10-20 mm
T568B T568B
×1
Run the cable
through the
waterproof
housing to the
RJ45 connector
before crimping.
❷
Remove protective capRemove protective cap
❹
❸
❶
To Next Page
Loading...