ECOFOREST Eco I Insert - Page 60

59
By pressing 'Test' the WiFi network will disappear for a few moments, the browser might show us the message
"communication failure". Verify that the WiFi network of the machine has returned and that we are connected
to it before accepting the message. Also wait for the message "Successful" or "Not Successful" to appear.
ETHERNET:
First of all, check that there is a connection via Ethernet, between router and CPU of the stove/boiler. (point
5.9.1).
Select ‘
LAN-Ethernet”.
Check cable connection
between WiFi and stove.
Press 'Test'.
The electronic checks the
cable connection between
CPU and router
.
Drawing 51
Accept the message:
Before accepting, contact
your dealer for the ethernet
configuration. This action will
disable the WIFI connection.