Ecosoft FPV12ECO - Technical Specifications

3
This manual is the intellectual property of Ecoso. Copying and reprinng is prohibited. © 2017
ENG
Technical specications:
Application
Parameter
FPV12ECO FPV34ECO FPV12HWECO FPV34HWECO FPV12PECO FPV34PECO FPV4510ECO FPV4520ECO
Standard size
(height)
10” 20”
Connecon size 1/2” 3/4” 1/2” 3/4” 1/2” 3/4” 1”
Connecon type In-line
Operang water
temperature
+3…+43 °C
37…109 °F
+3…+75 °C
37…167 °F
+3…+43 °C
37…109 °F
+5…+35 °C
41…95 °F
Maximum ow rate
10 L/min
2.5 gpm
50 L/min
13 gpm
83 L/min
22 gpm
Recommended
operang pressure
3.5-4 bar
50-60 psi
3.5–6 bar
50–87 psi
Maximum pressure
6.0 bar
87 psi
8.6 bar
125 psi
30 bar
*
435 psi
*
8 bar
116 psi
*Crical bursng pressure
In-line lters are intended for cold and hot water purication from suspended particles (rust, sand, silt, scale
etc.) and for water turbidity correction. Allowable feed water temperature for each lter model has listed
in the specications.