7
This manual is the intellectual property of Ecoso. Copying and reprinng is prohibited. © 2017
ENG
Filter replacement
Replacement lter should be changed regularly. Its service life depends on your feed water quality and
lter usage.
Replacement lter has to be changed at the end of the service life dened by a water meter (should be
bought separately) or by a capacity decrease. Replacement lters should be changed within a period from
two to six months, depending on the quality of puried water.
We recommend using only original replacement lters. In-line lter is withdrawal from warranty if there
are used replacement lters from other manufacturers. The Ecosoft warrants the quality of original
replacement lters, full compliance with their sizes and characteristics, and safe lter operation.
To change the replacement lter:
1. Shut o feed water valve.
2. Open water faucet after lter to relieve the pressure
3. Unscrew lter housing with a wrench and remove the used replacement lter. Take care as the housing
is lled with water.
4. Wash the lter housing and head thoroughly.
5. Put the new replacement lter into the housing.
6. Put the O-ring in the groove inside the lter housing and straighten it. If the O-ring is damaged, you
should install new (bought separately).
To Next Page
Loading...
