8
This manual is the intellectual property of Ecoso. Copying and reprinng is prohibited. © 2017
Filter replacement
Transportation and storage
7. Screw the housing with the replacement lter by hand.
8. Slightly open feed water valve and check the tightness of connections.
The lter is ready for use again.
If the feed water quality does not allow long-term use polypropylene melt blown replacement lter, it is
recommended to use polypropylene string wound lter manufactured by Ecosoft.
The product can be shipped by any means of transport (except unheated during cold seasons).
The product should be stored in original packaging, at an ambient temperature in the range of
+5…+40 °C (41...104 °F), not closer than 1 m (3,3 ft) to any heating appliances. Drying, freezing, direct
sunlight is not allowed.
We recommended buying the product in authorized centers. You should check the integrity of the
packaging, the product, and the availability of documentation (passport, warranty card, a document
conrming the purchase, receipt, invoice, etc.).
To Next Page
Loading...
Need help?
General
