4
This manual is the intellectual property of Ecoso. Copying and reprinng is prohibited. © 2017
The lter should be connected by the service center specialist.
The lter installs on the pipe of water supply and connects using metal-plastic pipes. You may also need
ttings or adapters (not supplied with the lter).
CAUTION!
Shut o water supply before the lter installation.
Example 1: lter can be connected to the pipe by speedt or threaded ttings which connect tting body
that screwed into the lter with the pipe.
Example 2: during connection to a metal-plastic pipe threaded ttings screwed on tting body rst by
hand, then with a wrench. Do not apply excessive force while screwing.
Example 3: if the tting body is damaged or missing, the lter head can be screwed on the threaded pipe.
Filter installation
To Next Page
Loading...
Need help?
General
