5
This manual is the intellectual property of Ecoso. Copying and reprinng is prohibited. © 2017
ENG
Filter installation
For sealing threaded connection during installing the lter use PTFE tape.
After the lter installation carefully open the water supply and make sure that the connections are leak-
free. If water leaks between the head and the housing of the lter, tighten them with a special wrench
(included).
CAUTION!
To ensure normal operation of the lter and prevent emergencies caused by water pressure changes in
the pipeline, the manufacturer recommends using optional pressure controller before the lter. You can
buy the pressure controller in specialist plumbing shops.
Recommended: Model D04, D05, D06 Honeywell.
To Next Page
Loading...
