This manual is the intellectual property of Ecoso. Copying and reprinng is prohibited. © 2017
INSTALLATION AND OPERATION GUIDELINES FOR REVERSE OSMOSIS SYSTEMS
ECOSOFT ROBUST 1000, ROBUST 1500, ROBUST PRO, ROBUST 3000
Puried water. Tube from the pure water outlet to the ultraviolet unit.
Pressure tank. Tube from the tank outlet to the valve on the tank.
Drain. Tube from the drain outlet to the drain saddle.
Inlet. Water supply tube from the water main.
Ultraviolet unit*. The tube from the UV unit outlet to the puried water faucet.
*UV unit — oponal equipment, not included in the delivery.
The system must be connected by the service center specialist.
4. INSTALLATION STEPS
4.1. INSTALLATION CONDITIONS CHECK
Carefully read this manual before installing the reverse osmosis system.
Check that feed water meets requirements in p. 2.2.
If the water quality does not meet requirements, refer to a water treatment specialist company
for assistance selecng the appropriate water ltraon product for normalizing feed water quality.
Before proceeding with the installaon, ensure there is enough space for the assembled system. If
using pressure tank, provide room for it as well. In case of shortage of space, pressure tank can be
removed to the distance of connecng tube length.
Install the reverse osmosis system in accordance with below procedure.
3.3. ECOSOFT ROBUST WITH PRESSURE TANK AND ULTRAVIOLET UNIT
4.2. INSTALLATION
CAUTION! This product has been factory tested for leaks, and may contain residual moisture.
Before installaon of tubing, lters, and membranes, wash your hands with anbacterial soap.
Ensure that the installaon place is shielded from direct sunlight and removed from heang
appliances.
To Next Page
Loading...
Need help?
General
