Ecosoft ROBUST 1000 User Manual

6
7
This manual is the intellectual property of Ecoso. Copying and reprinng is prohibited. © 2017
INSTALLATION AND OPERATION GUIDELINES FOR REVERSE OSMOSIS SYSTEMS
ECOSOFT ROBUST 1000, ROBUST 1500, ROBUST PRO, ROBUST 3000
1
At feed water TDS of 1000 ppm and temperature of feed water of 25 °С, ±10%.
2
If pressure of water in your system does not meet requirement, install a pressure booster pump to raise it. If
water pressure exceeds the upper limit, install a pressure regulator before the RObust.
3
Using the RObust with feed water temperature between +20 and +30 °С produces a lower rejecon rate and
higher ow rate, which yields higher TDS of puried water. Using the system with feed water above +30 °С is
advised against.
2. SPECIFICATIONS AND COMPONENTS
2.1 TECHNICAL SPECIFICATIONS
Parameter
Value
RObust 1000 RObust 1500 RObust Pro RObust 3000
Puried water ow rate
1
, L/h 55–60 70–75 70–75 145–150
Feed water ow rate, L/h 110–125 140–150 140–150 290–310
Concentrate ow rate, L/h 55–65 70–75 70–75 145–160
Inlet water pressure, bar 2,0–5,0
2
Operang pressure, bar 5,0–7,0
Feed water temperature, °С +4…+30
3
Ambient air temperature, °С +5…+40
3
Connecon to water mains
½
"
Overall dimensions,
H × W × D, mm
420x425x220 420х410х305 420х410х305 445x480x380
Weight, kg, max. 6 9 10 25
Electrical rang 230 V, 50 Hz
Power consumpon, W, max. 80 80 80 250
Ingress protecon rang IP 54

Ecosoft ROBUST 1000 Specifications

General

Brand	Ecosoft
Model	ROBUST 1000
Category	Water Dispenser
Language	English