EN
45
Spot Cleaning Mode
Return to Charger Mode
Edge Cleaning Mode
This mode is applicable for an area of highly
concentrated dirt or dust. In Spot Cleaning Mode,
DEEBOT 6 focuses on a specic area to clean.
This mode is good for cleaning the edges and
corners of a room. In Edge Cleaning Mode,
DEEBOT 6 cleans along a border (e.g. wall).
When battery power gets low, DEEBOT 6 automatically switches to Return to Charger Mode and
returns to the Charging Dock to recharge itself.
DEEBOT 6 can be also be sent back to the Charging Dock at any time by pressing the Return to
Charger Mode Button on DEEBOT 6 or on the Remote Control.
3. Operating and Programming
These modes can only be selected using the Remote Control.
*
To Next Page
Loading...
