FR-CA
18
EN
Rinse the Sponge Filter, Dust Bin and Filter Net
under running water. reinstalling.
Main Brush
Turn the robot over. Push both buttons on the Main Brush Option and remove the Main Brush
cover. Remove the Main Brush. Use the Multi-Function Cleaning Tool to cut off and remove any
hair tangled around the Main Brush. Clean any tangled hair or debris from the Main Brush.
4.3 Main Brush and Side Brushes
*
A Multi-Function Cleaning Tool is provided for easy maintenance. Handle with care, this
cleaning tool has sharp edges.
4. Maintenance
Cleaning the Side Brushes
Remove any hair or debris tangled around the Side
Brushes with the provided Multi-Function Cleaning
Tool. Remove the Side Brushes and wipe the Side
Brushes and their slots with a clean cloth.
To Next Page
