ECOVACS DEEBOT N79S - Cleaning Mode Selection

EN
13
3. Operating and Programming
* For models with app-connectivity, various functions can be performed using the ECOVACS
App.
3.3 Cleaning Mode Selection
DEEBOT has several cleaning modes to choose from to effectively clean different oors.Cleaning
modes are selected using the Remote Control.
■ This mode is applicable for an area of highly
concentrated dirt or dust. In Spot Cleaning
Mode, DEEBOT focuses on a specic area
to clean. DEEBOT cleans the area in a spiral
pattern using MAX suction power and stops
when it completes Spot Cleaning.
■ To start Spot Cleaning Mode, press Spot
Cleaning Mode Button on the Remote
Control.
2
Spot Cleaning Mode
( Less than 3 minutes)
■ This is the most commonly used mode. In
AUTO Cleaning Mode, DEEBOT cleans in
a straight line and changes direction when it
meets an obstacle.
■ To start AUTO Cleaning Mode, Press the
button on DEEBOT or the AUTO Mode
Button on the Remote Control.
1
AUTO Cleaning Mode