ECOVACS DEEBOT T9+ - OZMO Pro Oscillating System; 1 Add Water; 2 Attach Disposable Mopping Pad

12
EN
3
Pressing for 3 seconds to send DEEBOT back to the Auto-Empty Station.
2
Pause
Return to Charge
Note: The robot’s Control Panel stops glowing after the robot is paused for a
few minutes. Press the AUTO Mode Button on DEEBOT to wake up the robot.
OZMO Pro Oscillating System
Add Water
Note:
1.Install OZMO Pro Oscillating System for oor scrubbing.
2.With electric oscillating mopping up to 480 times per minute, OZMO Pro is
applicable for areas of highly concentrated dirt or dust.
3.Before installing OZMO Pro, please make sure the contacts are thoroughly dry.
4.Please avoid using OZMO Pro on the carpet.
1
*
To prolong the service life of OZMO Pro, it
is recommended to use puried water or
softened water.
*
Do not soak OZMO Pro in water.
Attach Disposable Mopping Pad
2