ECOVACS DLN26 - User Manual

Questions and Answers

M
Mr. Brandon DuncanAug 30, 2025
Why does ECOVACS DLN26 Vacuum Cleaner return to dock early?
- E
  Emily TannerAug 31, 2025
  If your ECOVACS Vacuum Cleaner returns to the Docking Station before finishing, it could be due to several reasons. Working time varies depending on floor surface, room complexity, and Cleaning Mode. When the battery is low, DEEBOT switches to Recharge Mode. To resolve this, turn on the Continuous Cleaning function in the ECOVACS HOME App. Also, ensure that the DEEBOT can reach all areas by tidying up any furniture or barriers. Place the Docking Station against the wall of a central room in the house.
D
Dr. Charles CollierAug 29, 2025
How to fix ECOVACS DLN26 Vacuum Cleaner that gets stuck?
- M
  Michael GarciaAug 30, 2025
  If your ECOVACS Vacuum Cleaner gets stuck and stops, it may be tangled with something on the floor like electrical wires, curtains, or carpet fringing. The DEEBOT will attempt to free itself. If it can't, manually remove the obstacles and restart it. It might also be stuck under furniture. In this case, set a physical barrier or a Virtual Boundary in the ECOVACS HOME App.
H
Holly HernandezAug 28, 2025
Why does my ECOVACS DLN26 miss spots?
- J
  James ThompsonAug 28, 2025
  If your ECOVACS Vacuum Cleaner misses cleaning spots or repeats cleaning the same area, it may be due to small objects or barriers on the floor interfering with the cleaning cycle. Remove power cords and small objects from the floor to ensure cleaning efficiency. Also, ensure that floor wax is dried before DEEBOT starts cleaning. Tidy up the area by placing furniture and small objects properly and remove any objects blocking the TrueMapping Distance Sensor.
B
Bob RamosAug 27, 2025
What to do if my ECOVACS Vacuum Cleaner cannot return to the Docking Station?
- K
  Kenneth HinesAug 27, 2025
  If your ECOVACS Vacuum Cleaner cannot return to the Docking Station, check that the Docking Station is correctly connected. Avoid manually moving the Docking Station during cleaning and pausing the DEEBOT for more than 90 minutes. Ensure the DEEBOT starts cleaning from the Docking Station.
J
Jamie WillisAug 27, 2025
What to do if ECOVACS Vacuum Cleaner DEEBOT cannot return to Auto-Empty Station?
- D
  Donna BakerAug 27, 2025
  If your DEEBOT cannot return to the Auto-Empty Station, consider these potential causes: * The Auto-Empty Station might not be placed correctly. * Ensure the Auto-Empty Station is correctly connected. * Avoid manually moving the Auto-Empty Station during cleaning. * Try not to pause DEEBOT for more than 90 minutes. * Make sure DEEBOT starts cleaning from the Auto-Empty Station.
M
Michael EspinozaAug 25, 2025
How to fix ECOVACS DLN26 Vacuum Cleaner DEEBOT not charging?
- D
  Diane UnderwoodAug 26, 2025
  If your DEEBOT isn't charging, there could be several reasons. First, ensure that the DEEBOT is switched ON. Check that the robot's charging contacts are connected to the Auto-Empty Station pins and that the power cord is firmly connected to the Auto-Empty Station, which is also connected to the power supply. If the battery is completely discharged, please contact Customer Care for help.
N
Nicole AguilarAug 25, 2025
What to do if ECOVACS DLN26 Vacuum Cleaner is not releasing water while mopping?
- L
  Lisa VincentAug 25, 2025
  If the water isn't coming out of the Reservoir when your ECOVACS Vacuum Cleaner is mopping, the water inlet filter on the bottom of the Reservoir may be clogged. Unscrew the water inlet and clean the filter. Also, check if the Reservoir is empty and add water if needed. Finally, inspect the water outlets on the bottom of the DEEBOT for clogs and clean them.