Need help?Do you have a question about the EcoWater ERR 3002R30 and is the answer not in the manual?
Covers safe handling, installation rules, and general warnings.
Details power supply, voltage, and water pressure limits for operation.
Explains what parts are covered, for how long, and how to get service.
Outlines limitations, disclaimers, and consumer rights under the warranty.
Details the bond issued by Safeco Insurance Company of America for performance.
Describes hardness, its effects, and how softeners address it.
Explains different iron types, their detection, and softener removal capabilities.
Describes sediment, its appearance, and typical filtration methods.
Details barium in water, EPA limits, and measurement via analysis.
Explains radium in water, EPA limits, and measurement via analysis.
Covers bypass valve installation, drain needs, and electrical outlet placement.
Details installing bypass valves, copper tubes, and connecting inlet/outlet plumbing.
Instructions for turning off the water supply and draining house pipes.
Covers connecting inlet/outlet plumbing, copper tubing types, and grounding continuity.
Steps for installing brine tank overflow, adding salt, and sanitizing the unit.
Connecting the transformer and initiating the first recharge cycle.
Guides setting model code, clock time, and water hardness for first-time use.
Configuring the regeneration schedule and setting up the remote monitor.
Describes the various display screens showing water status, flow, and salt level.
Explains power loss memory, keypad functions, and beeper signals.
Details how to manually start a recharge now or schedule one for tonight.
Explains accessing and setting the clock, water hardness, and recharge time.
Covers viewing water usage, flow rates, and configuring display units.
Shows remote status, sends diagnostic messages, and displays progress.
Covers setting language, testing remote, and configuring low salt alerts.
Explains how to set the model code and restore the controller to factory defaults.
Describes LED indicators, battery checks, and changing the remote channel.
Guides on refilling salt, recommended types, salt bridges, and resin cleaning.
Instructions for cleaning the nozzle and venturi assembly for proper function.
Steps for relieving pressure and using bypass valves for service.
Covers initial checks, E.A.S.E. diagnostics, and understanding error codes.
Explains system self-diagnostics, error codes, and their possible causes.
Guides for manual diagnostics, checking turbine, and common issues.
Verifies proper operation of regeneration cycles, brine draw, and flow rates.
Addresses hard water bypass, leaks, salty taste, and wiring schematic.
Provides physical dimensions of the unit and nominal resin tank sizes.
Lists salt storage capacities for different brine tank configurations.
Details softening capacity, flow rates, hardness, iron removal, and pressure.
Illustrates the overall assembly of the water conditioner with numbered parts.
Lists part numbers and descriptions for the conditioner assembly components.
Shows a detailed diagram of the valve assembly with numbered components.
Lists part numbers and descriptions for the valve assembly components.
General| Brand | EcoWater |
|---|---|
| Model | ERR 3002R30 |
| Category | Water Filtration Systems |
| Language | English |
To Next Page