19
A C
B
D
EcoCast: Additional Receiving Speakers
1. Power on the additional EcoBoulder Max speaker(s) (Speaker C and
Speaker D). Press the EcoCast button to cycle through to and
initiate EcoCast Receiving Mode. The EcoCast Receiving icon
will flash on the LED screen, and the speaker(s) will announce,
“EcoCast receiving.”
2. On Speaker A (the speaker with the EcoCast Transmitting icon
on), PRESS AND HOLD the EcoCast button for 3 seconds. The
EcoCast transmitting icon will flash.
3. Once the connection between the speakers is successful, Speaker C
(and Speaker D) will announce, “Connection Successful,” and start
playing music from your Bluetooth device.
Notes:
· If all the speakers are turned off, then turned on, the speaker(s) in
EcoCast Receiving Mode (Speakers B, C, and D) will automatically
re-connect to the speaker in Transmitting Mode (Speaker A). If they are
not automatically re-connected, please follow the above steps.
· You can also pair the EcoBoulder Max with any other ECOXGEAR
speaker bearing the EcoCast symbol .
· The EcoCast functionality is only available while using Bluetooth as
your Audio Source at a maximum range of 30 feet between speakers.
· While connecting the EcoBoulder Max speakers, make sure that the
speakers are within a few feet of each other.
To Next Page
Loading...
Need help?
General