10
Display + Controls
1. Power Button: PRESS AND HOLD for 3 seconds to turn the EcoBoulder Max on
or off.
2. Qi Wireless Charging Button: Press this button to enter into Qi Wireless
Charging mode. Place your smartphone on the wireless charging pad. Do NOT
place any metal objects, including metal phone cases, on the wireless charging pad.
3. Audio Source Button: Press this button to cycle through the following Audio
Sources: Bluetooth, FM, AM, and AUX.
4. Bluetooth Button: When the Audio Source is Bluetooth, if the Bluetooth icon
is not flashing on the LED screen, press this button to enter pairing mode. If your
device is paired (solid icon on LED screen), press button to disconnect. PRESS AND
HOLD this button for 3 seconds to clear all pairing records.
5. EcoCast Button: If you have purchased additional EcoBoulder Max speakers (or
other ECOXGEAR speakers bearing the EcoCast symbol), use this button to cycle
through Speaker Mode, EcoCast Transmitting Mode, and Receiving Mode.
6. Play / Pause / Answer Button: Press to play / pause a track or answer /
end a mobile call from a paired Bluetooth device.
7. EcoTalk Button: This button activates your Voice Assistant (Siri and OK Google).
8. Track Buttons: Press these buttons to go to the previous/next track on a paired
Bluetooth device.
9. Microphone Volume Control Buttons: Press to adjust the microphone
volume. PRESS AND HOLD to adjust the volume continually (volume levels are
0 to 30).
10. Master Volume Control Buttons: Press to adjust the speaker’s main mix
volume. PRESS AND HOLD to adjust the volume continually (volume levels are
0 to 30).
1
2
4
3
5
6
814
15
7
10
11
1213
9
15
AM/FM Presets
Store a favorite radio station to quickly tune to a preset radio station.
There are 6 positions for AM stations and 6 positions for FM stations.
While listening to a station you want to store, PRESS AND HOLD a preset
button (P1~P6) to assign the current station to that preset number. The
LED screen will flash 2 times to indicate it has been set.
If you want to listen to a stored preset, press a preset button (P1~P6) to
go to the stored radio station.
EcoTalk
Press the EcoTalk button to activate the voice assistant on your device
(Siri, OK Google, etc.). Once activated, the speakerphone mic on your
EcoBoulder Max will hear your voice commands and transfer them to the
voice assistant on your device.
Notes:
· Before using the EcoTalk function, your device must be connected to
the EcoBoulder Max via Bluetooth.
· Not all devices have voice assistant functionality; refer to your device
for details.
Party Lights / Backlight Button
Press to cycle through 5 Party Light Modes: White Light, Red Light,
Green Light, Music Sync, and Fading.
Press one more time to turn off the Party Lights.
PRESS AND HOLD for 3 seconds to turn button backlights on / off.
To Next Page
Loading...
Need help?
General