12
Operations
Power On/Off
Power On: PRESS AND HOLD for 3 seconds to power on the
EcoBoulder+. “Power On, Ready to Connect” voice prompt will be heard.
Power Off: PRESS AND HOLD for 3 seconds to power off
the EcoBoulder+.
Pairing a Bluetooth Device
1. Turn on your Bluetooth device.
2. Power on EcoBoulder+. “Power on, ready to connect” voice prompt
will be heard. If already powered on and not in Bluetooth mode, press
SOURCE until it is in Bluetooth mode. (If Bluetooth icon on LED screen
is not flashing, briefly press to start pairing your device.)
3. Navigate to your Bluetooth device’s setup screen, find ECOXGEAR
and connect. If the connection is successful, the Bluetooth icon will be
lit solid and your EcoBoulder+ will announce “Connection successful.”
To Next Page
Loading...
