16
EcoConnect - Wireless Stereo
Connection of Two Speakers
When you have two EcoBoulder+ speakers and
want to wirelessly pair them for stereo sound,
first follow the Pairing a Bluetooth Device
instructions to connect one EcoBoulder+ speaker
to your Bluetooth device. Leave this EcoBoulder+
speaker powered on and connected to your device.
Next, turn on your second EcoBoulder+ speaker. Once the second speaker
is powered on (the Bluetooth light will be flashing), press the EcoConnect
Button on both of your EcoBoulder+ speakers. Wait a few seconds
for the speakers to wirelessly connect. Both speakers will announce
“Connection Successful,” and the EcoConnect icon on the LED screen on
both units will light up once the connection is completed.
Once the two EcoBoulder+ speakers are connected via EcoConnect, start
playing music from your device. Both connected EcoBoulder+ units will
play the music from you device.
The EcoConnect default has your speakers playing in stereo mode. If you
would like to change which speaker is left or right or if you want to set
each speaker to play in mono mode you can press and hold . Each
press and hold of will change the speaker from RIGHT / LEFT to
LEFT / RIGHT to MONO. When changing modes, the left and right speakers
will announce, "Stereo mode, left speaker," "Right speaker," respectively.
When in mono mode, both speakers will annouce, "Mono mode."
The EcoConnect connection between the two EcoBoulder+ speakers will
NOT automatically re-connect after the speakers are turned off. To
re-establish EcoConnect between the speakers, after power off, please
follow the above steps.
Notes:
· You can also pair the EcoBoulder+ with any other ECOXGEAR speaker
bearing the EcoConnect symbol .
· The EcoConnect functionality is only available while using Bluetooth as
your audio source at a maximum range of 30 feet between both of the
paired speakers.
To Next Page
Loading...
Need help?
General