To Next Page

To Previous Page

Using BIOS

Set Supervisor Password/Set User Password

You can select this option and press <Enter> to access the sub-menu. You can use the sub-

menu to change the supervisor password.

Supervisor Password/User Password (Not Installed)

This item indicates whether a supervisor password/user password has been set. if the pass-

word has been installed, Enabled displays. If not, Disabled displays.

Security Features

This page helps you install or change a password.

SMART FAN Control

SMART FAN Control <Full Speed>

Duty Cycle <90%>

Main Advanced Power Security Boot Exit

Select Boot Device

Selecct Screen

Select Item

Select SubMenu

Setup Defaults

Save and Exit

Exit

Enter

F9 =

F10 =

Esc =

InsydeH2O Setup Utility

SMART FAN Control

Scroll to this item and press <Enter> to view the following screen:

SMAER FAN Control (Full Speed)

This item allows you to enable or disable the control of the system fan speed by changing

the fan voltage.

Duty Cycle (90%)

This item shows you the proportion of time during which the SMART FAN Control is

operated.

Press <Esc> to return to the Advanced Features page.

Main Advanced Security Power Boot Exit

Supervisor Password : Not Installed

User Password : Not Installed

Set Supervisor Password

Set User Password

Install or Change the

password.