Chapter 3
B250H4-M20 USER MANUAL
37
CPU Configuration
The item in the menu shows the CPU.
Intel(R) Core(TM) i3-7300 CPU @ 4.00GHz
This is display-only field and displays the information of the CPU installed in your
computer.
Main Advanced Chipset Tweak Security Boot Exit
+/- : Change Opt.
Enter/Dbl Click : Select
: Select Screen
/Click: Select Item
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC/Right Click: Exit
Enabled for Windows XP
and Linux (OS optimized for
Hyper-Threading Technology)
and Disabled for other OS (OS
not optimized for
Hyper-Threading Technology).
CPU Configuration
Intel(R) Core(TM) i3-7300 CPU @ 4.00GHz
Processor Speed 4000 MHz
ID 0x906E9
Microcode Revision 48
Number of Processors 2Core(s) / 4Thread(s)
VMX Supported
SMX/TXT Not Supported
Hyper-Threading Enabled
Active Processor Cores All
Limit CPUID Maximum Disabled
Intel (VMX) Virtualization Technology Enabled
Package C State Limit Auto
Enhanced Halt (C1E) Enabled
Intel(R) Speed Shift Technology Disabled
Processor Speed (4000 MHz)
This item shows the processor speed.
ID (0x906E9)
This item shows the processor ID.
Microcode Revision (48)
This item shows the Microcode Revision.
Number of Processors (2Core(s) / 4Thread(s))
This item shows the core Number of Processor.
VMX (Supported)
This item shows the computer supports the VMX or not.
SMX/TXT (Not Supported)
This item shows the computer supports the SMX/TXT or not.
Hyper-Threading (Enabled)
This item is only available when the chipset supports Hyper-Threading and you are
using a Hyper-Threading CPU.
Active Processor Cores (All)
Use this item to control the number of active processor cores.
Limit CPUID Maximum (Disabled)
Use this item to enable or disable the maximum CPUID value limit, you can enables
this item to prevent the system from “rebooting” when trying to install Windows NT
4.0.
To Next Page
Loading...
Need help?
General
